Operator's Manual

WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
Introduction
Thiscuttingunitisdesignedforcuttingturfongreensand
smallfairwaysofgolfcourses.
Readthisinformationcarefullytolearnhowtooperateand
maintainyourproductproperlyandtoavoidinjuryand
productdamage.Youareresponsibleforoperatingthe
productproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comforproduct
andaccessoryinformation,helpndingadealer,ortoregister
yourproduct.
Wheneveryouneedservice,genuineToroparts,oradditional
information,contactanAuthorizedServiceDealerorToro
CustomerServiceandhavethemodelandserialnumbersof
yourproductready.Figure1identiesthelocationofthe
modelandserialnumbersontheproduct.Writethenumbers
inthespaceprovided.
G020063
Figure1
1.Locationofthemodelandserialnumbers
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhassafety
messagesidentiedbythesafetyalertsymbol(Figure2),
whichsignalsahazardthatmaycauseseriousinjuryordeath
ifyoudonotfollowtherecommendedprecautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanicalinformation
andNoteemphasizesgeneralinformationworthyofspecial
attention.
Contents
Safety...........................................................................3
SafetyandInstructionalDecals.................................3
Setup............................................................................4
InstallingtheFrontRoller.........................................4
InstallingtheBallStuds............................................4
InstallingtheHoopLink,OffsetLink,orChain
Link...................................................................4
ProppingUptheCuttingUnit..................................5
RepositioningtheCounterWeights............................5
AdjustingtheBedknifetotheReel.............................6
AdjustingtheRearRoller..........................................6
AdjustingtheHeight-of-Cut.....................................7
AdjustingtheCut-OffBar........................................9
ProductOverview.........................................................10
Specications........................................................10
Attachments/Accessories........................................10
Operation....................................................................11
MakingDailyAdjustmentstotheCutting
Unit..................................................................11
Maintenance.................................................................12
ServicingtheBedbar...............................................12
BacklappingtheReel...............................................13
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA
AllRightsReserved