Operator's Manual

Maintenance
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
DisassemblingtheReel
Disassemblethereelwheneveryouneedtochangea
bladeorreplacethereelbearings.
Important:Ensurethatthe2shaftretainersand
spacerareinplacebeforeinstallingthebearing
onthereel(Figure6).Torquetheinsertnutsto
136N∙m(100ft-lb).
g016597
Figure6
1.Left-handthreadedinsert
nut
4.Spacer
2.Bearing
5.Slotinshaft
3.Seal6.Shaftretainer(installthese
rst)
8