Operator's Manual

g002136
Figure54
1.Brake-uidreservoir
2.Minimumline
4.Iftheuidlevelislow,performthefollowing:
A.Cleantheareaaroundthereservoircap
andremovethecap(Figure53).
B.AddDOT3brakeuidtothereservoiruntil
theuidlevelisabovetheMinimumline
(Figure54).
Note:Donotoverllthereservoirwith
brakeuid.
C.Installthereservoircap(Figure53).
5.Closethehoodofthemachine.
InspectingtheBrakes
ServiceInterval:Every100hours
Brakesareacriticalsafetycomponentofthemachine.
Aswithallsafetycomponents,theyshouldbeclosely
inspectedatregularintervalstoensureoptimum
performanceandsafety.Thefollowinginspections
shouldbedoneevery100hours:
•Inspectthebrakeliningforwearordamage.Ifthe
lining(brakepad)thicknessislessthan1.6mm
(1/16inch),youshouldreplacethebrakelining.
•Inspectthebackingplateandothercomponents
forsignsofexcessivewearordeformation.If
anydeformationisfound,replacetheappropriate
components.
•Checkthebrake-uidlevel;refertoCheckingthe
Brake-FluidLevel(page43).
ReplacingtheServiceand
Parking-BrakePads
ServiceInterval:Every400hours
ContactyourauthorizedAuthorizedToroService
Dealertoinspectandpossiblyreplacetheserviceand
parking-brakepads.
ChangingtheBrakeFluid
ServiceInterval:Every1,000hours
ContactyourauthorizedT orodistributor.
44