Operator's Manual

g192347
Figure35
1.Spindle
2.Hubandrotorassembly
7.Wipecleanthespindlewitharag.
8.Repeatsteps1through7tothehubandrotorat
theothersideofthemachine.
GreasingtheWheelBearings
1.Removetheoutboardbearingandbearingrace
fromthehub(Figure36).
g033050
Figure36
1.Seal4.Bearingcavity(hub)
2.Inboardbearing
5.Outboard-bearingrace
3.Inboard-bearingrace
6.Outboardbearing
2.Removetheseal,inboardbearingfromthehub
(Figure36).
3.Wipecleanthesealandcheckforwearand
damage.
Note:Donotusecleaningsolventtocleanthe
seal.Replacethesealifitiswornordamaged.
4.Cleanthebearingsandraces,andcheckthese
partsforwearanddamage.
Note:Replaceallwornordamagedparts.
Ensurethatthebearingsandracesareclean
anddry.
5.Cleanthecavityofthehubofallgrease,dirt,
anddebris(Figure36).
6.Packthebearingswiththespeciedgrease.
7.Fillthecavityofhub50to80%fullofthe
speciedgrease(Figure36).
8.Assembletheinboardbearingontotheraceat
theinboardsideofthehubandinstalltheseal
(Figure36).
9.Repeatsteps1through8tothebearingsforthe
otherhub.
33