Installation Instructions

4
InstallingtheCargoBed
Partsneededforthisprocedure:
2
Bolt(1/2x4-1/2inches)
2Flangenut
Procedure
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,shutoffthemachine,andremove
thekey.
2.Rotatethecargobedsothatthepivot-bracket
assemblyandproprodarefacingdownward.
3.Usingliftingequipmentatthefrontandback
ofthecargobed,raisethecargobedand
alignitovertheframeofthemachinewiththe
pivot-bracketassemblyrearward(Figure4).
g191339
Figure4
4.Adjusttheheightandpositionofthelifting
equipmentsothattheshortlegoftheprop
rodisalignedwiththekeyholeattheendof
theprop-rodslotintheleft-framechannelor
prop-rodbracket(Figure5).
Note:Youmustanglethecargobedwiththe
liftingequipmentinordertoaligntheproprodto
thekeyhole.
5.Swingtheproprodforwardandinserttheshort
legoftherodthroughthekeyhole(Figure5).
g191980
Figure5
1.Proprod
2.Keyhole(prop-rodslot)
6.Movethecargobedandproprodrearwarduntil
thepivot-bracketassemblyisalignedoverthe
rear-framechannel.
7.Carefullylowerthecargobeduntiltheholesin
thepivotbracketsalignwiththemountingholes
inthecargobedsupports(Figure6).
g191148
Figure6
1.Bolt(1/2x4-1/2inches)
3.Pivotbracket
2.Cargobedsupport
4.Flangenut
8.Use2bolts(1/2x4-1/2inches)and2angenuts
tosecuretherightandleftcargobedsupports
tothepivotbrackets(Figure6).
9.Torquethe2angenutsto16to19N∙m(140
to170in-lb).
5