Installation Instructions

AdjustingtheShiftCable
1.Settheshiftlevertothemiddleposition.
2.Threadtheball-jointassemblyontotheshiftcableand
secureittotheshift-armassembly(Figure35).
g036769
Figure35
1.Ball-jointassembly4.Jamnut
2.Shift-armassembly
5.Jamnuts
3.Shift-cablebracket6.Shiftcable
3.Varythecabletravelbetweenthebracketandshift-arm
assemblyuntilthecableengagesintothedesiredshift
position.
4.Usethejamnutstosecurethecableadjustment
InstallingtheFloorPlate
Usethe4angebolt(5/16x1-1/4inches),4bolt(1/4x
1-1/4inches),andlocknutstosecuretherearoorplateto
themachine(Figure36).
g034126
Figure36
1.Flangebolt(5/16x1-1/4
inches)
3.Floorplate
2.Bolt(1/4x1-1/4inches)4.Locknut(1/4inch)
13