Operator's Manual

FlexTipReelRemoval
1.Placethemachineonahardandlevelsurface.
2.Raisethefrontofthesweeperashighaspossible
byloweringthejack.
3.Raisethereeltothehighestposition.
4.Removethelowerbeltguardandreeldrivebelt
(
Figure27andFigure28).
5.Removethe2bolts,lockwashers,andnutssecuring
thereelshaftbearingstothereelsupportarmson
eachsideofthesweeper.Lowertheextipreelto
theground.
6.Liftthereelsupportarmstothehighestposition.
7.Slidetheendoftherakerearwardandpullitout
fromunderthemachine.
FlexTipRakeRod
OrFingerPlate
Replacement
1.Removetheboltandlocknutfromoneendofthe
reel(Figure31).
1
2
g015286
Figure31
1.boltandlocknut2.Locknut
2.Removethelocknutonlyfromtheoppositeendof
thereel.
3.Drivetherodfromtheendplate.Drivetherodfrom
theendwithoutthetabweldedtoit.
4.Removethengerplatesorrodsasrequiredand
replace.
5.Lineupthengerplatewiththerodanddrivethe
rodbackthroughtheendplate.
6.Attachthebolt,locknuts,andhookupthesprings.
25