Service Manual

Workman GTX GasolinePage 5 − 12Electrical System

USB Charge Port

The USB charge port can be used to charge or power

electrical devices that use a USB port. The charge port

has a 5 VDC output and is mounted to the dash (Fig. 12).

If the vehicle wire harness is to be disconnected from the

charge port, note the wire harness connections at the

charge port for assembly purposes. The white wire har-

ness lead should be connected to the positive (+) termi-

nal on the charge port and the black wire harness lead

should be connected to the negative (−) terminal on the

charge port (Fig. 13).

Figure 12

1. USB charge port

1. Positive (+) terminal 2. Negative (-) terminal

Figure 13

WIRE HARNESS

USB CHARGE PORT

CONNECTIONS