Service Manual

Workman GTX Gasoline Page 6 -- 35 Chassis

Disassembly ( Fig. 33)

1. Park vehicle on a level surface, stop engine, set

parking brake and remove key from the key switch.

2. Raise front hood to gain access to the steering com-

ponents.

3. Remove dash and position it toward the front of the

vehicle to allow access to the shift lever assembly (see

Dash in this section). It is not necessary to remove

choke cable from dash.

4. Disassemble shift lever as necessary using Figures

33 and 22 as guides.

Assembly (Fig. 33)

1. Assemble shift lever using Figures 33 and 34 as

guides.

2. Carefully position and secure dash to vehicle (see

Dash in this section).

3. Lower and secure front hood.

1. Shift lever

2. Detent arm

3. Extension spring

Figure 34

Chassis