Operator's Manual

10
Loose Parts
Note: Use this chart as a checklist to ensure that all parts have been received. Without these parts, total setup cannot be
completed.
Description
Qty. Use
Hitch Tongue
Hitch Pin
Capscrew, 3/8–16 x 1–1/4 in.
Nut, 3/8–16
1
1
1
1
Mount to the sweeper.
Actuator Tab
Actuator Arm
Capscrew, 1/2–13 x 2–3/4 in.
Flat Washer, .531 x .063
Nut, 1/2–13
Idler Pin
1
1
3
6
3
1
Mount to the sweeper and the hitch tongue.
Hitch Pin
Hair Pin Cotter
1
1
Secure the sweeper hitch tongue to the tow
vehicle hitch.
Power Wire Harness 1 Connect to the tow vehicle battery.
Control Box w/Wire Harness
Control Box Mount
Screw, 1/4–20 x 3/8”
1
1
4
Mount control box to control box mount
J–Clip
Screw, 3/8–16 x 3/4 in.
Screw, 8 mm x 2
Washer, 3/16
6
3
1
2
Secure wire harness’ to vehicle
Receiver Assembly (Workman)
Knob
Clevis Pin
Hair Pin Cotter
Screw, 5/16–18 x 1 in.
Nut, 5/16
1
1
1
1
4
4
Mount receiver assembly to vehicle
Receiver Assembly (Sweeper)
Knob
Clevis Pin
Hair Pin Cotter
Screw, 3/8–16 x 1/2 in.
Washer
Nut, 3/8–16
1
1
1
1
2
4
2
Mount receiver assembly to sweeper
Cable Tie 8 Secure hydraulic hoses and wire harness