Operator's Manual

16
2. Using the previously removed dash screws and (2) new
washers, mount (2) J–Clips to the dash as shown in
figure 15.
1
1
Figure 15
1. J–Clip (2)
3. Route the control box harness thru the J–Clips as shown
in figures 16 & 17.
Figure 16
Figure 17
4. Route the control box harness behind the passenger seat
(Fig. 18).
Figure 18
5. Route the control box harness between the ROPS and
the back panel (Fig. 19).
Figure 19