Operator's Manual

17
6. Mount a J–Clip to the vehicle frame cross member with
a 3/8–16 x 3/4” lg. capscrew as shown in figure 20.
Route the harness thru the J–Clip as shown in figure 20.
1
1
Figure 20
1. J–clip
7. Mount a J–Clip to the vehicle frame cross member with
a 3/8–16 x 3/4” lg. capscrew as shown in figure 20.
Loop the harness and route it thru the J–Clip as shown
in figure 20.
8. Mount a J–Clip to the vehicle frame rail with a 3/8–16 x
3/4” lg. capscrew, as shown in figure 21. Route the
harness thru the J–Clip as shown in figure 21.
1
Figure 21
1. J–Clip
9. Route the harness along the frame rail to the top of the
transmission (Fig. 22)
1
Figure 22
1. Harness
10. Route the harness thru the right J–Clip as shown in
figure 23.
1
2
Figure 23
1. J–Clip 2. Harness
11. Route the harness to the rear of the machine as shown in
figure 24.