Operator's Manual

18
1
Figure 24
1. Control box harness
Connect the Hydraulic Hoses
Connect the hydraulic hoses from the sweeper to the quick
couplers on the tow vehicle (Fig. 25).
1
1
2
2
Figure 25
1. Hydraulic hoses 2. Harness’
Important Make sure the brush rotates in the proper
direction (when viewed from the motor end, the brush
should rotate clockwise. If the brush is rotating
counter–clockwise, reverse hydraulic hose connections.
Note: Mark the high pressure hose with a cable tie or
something similar to identify the correct hose installation
(Fig. 26).
1
2
Figure 26
1. High pressure hose 2. Cable tie
Connect the Harness’
Connect the harness from the sweeper to the harness on the
tow vehicle (Fig. 25).