Operator's Manual

2
All Rights Reserved
Printed in the USA
W 2006 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Contents
Page
Introduction 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supervisor’s Responsibilities 2. . . . . . . . . . . . . . . . .
Before Operating 2. . . . . . . . . . . . . . . . . . . . . . . . . .
While Operating 3. . . . . . . . . . . . . . . . . . . . . . . . . . .
While Dumping 3. . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Power Level 4. . . . . . . . . . . . . . . . . . . . . . . .
Sound Pressure Level 4. . . . . . . . . . . . . . . . . . . . . . .
Specifications 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Specifications 8. . . . . . . . . . . . . . . . . . . . .
Dimensions and Weights (approx.) 9. . . . . . . . . . . .
Optional Equipment 9. . . . . . . . . . . . . . . . . . . . . . . .
Loose Parts 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Instructions 11. . . . . . . . . . . . . . . . . . . . . . . .
Install the Hitch Tongue 12. . . . . . . . . . . . . . . . . . . . .
Install the Actuator arm 12. . . . . . . . . . . . . . . . . . . . .
Install the Power Wire Harness 13. . . . . . . . . . . . . . .
Mount the Sweeper To the Tow Vehicle 14. . . . . . . .
Mount Controller Box to the Workman Vehicle 14. .
Mount the Controller Box to the Sweeper 14. . . . . . .
Route and Secure Hoses and Harness 15. . . . . . . . . .
Install the Controller Box Harness 15. . . . . . . . . . . . .
Connect the Hydraulic Hoses 18. . . . . . . . . . . . . . . . .
Connect the Harness’ 18. . . . . . . . . . . . . . . . . . . . . . .
Mount the Windrow Blades 19. . . . . . . . . . . . . . . . . .
Before Operating 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjust the Brush Height 20. . . . . . . . . . . . . . . . . . . . .
Adjusting the Roller Scraper 21. . . . . . . . . . . . . . . . .
Adjust the Front Flap Height 21. . . . . . . . . . . . . . . . .
Check the Tire Pressure 21. . . . . . . . . . . . . . . . . . . . .
Check the Torque of the Wheel Nuts 22. . . . . . . . . . .
Know Your Controls 22. . . . . . . . . . . . . . . . . . . . . . . . . .
Controller Box 22. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Hopper Safety Support 23. . . . . . . . . . . . .
Checking Interlock System 24. . . . . . . . . . . . . . . . . .
Operating Tips 24. . . . . . . . . . . . . . . . . . . . . . . . . . . .
While Sweeping 24. . . . . . . . . . . . . . . . . . . . . . . . . . .
Dumping the Hopper 24. . . . . . . . . . . . . . . . . . . . . . .
Inspection And Cleanup After Operation 25. . . . . . .
Transporting Sweeper 25. . . . . . . . . . . . . . . . . . . . . .
Cold Weather Operation 25. . . . . . . . . . . . . . . . . . . . .
Lubrication 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lubricate the Fittings and the Bearings 26. . . . . . . . .
Maintenance 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Maintenance Schedule 27. . . . . . . . .
Daily Maintenance Checklist 28. . . . . . . . . . . . . . . . .
Troubleshooting 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Schematic 30. . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic 31. . . . . . . . . . . . . . . . . . . . . . . .
The Toro General Commercial Products Warranty 32. . .
Introduction
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. The two numbers are
stamped on a plate which is located on the blower housing.
1
Figure 1
1. Serial plate location
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. Danger, Warning, and Caution are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.