Operator's Manual

Operation

ROTATING PARTS CAN CAUSE SERIOUS

PERSONAL INJURY

• Keep hands and feet away from sweeper reel

while machine is running.

• Keep hands, feet, hair, and clothing away from

all moving parts to prevent injury.

• NEVER operate the machine with covers,

shrouds, or guards removed.

Warning

1. Place the unit on a level surface and apply the parking

brake.

2. Remove the hitch pin securing the actuator arm to the

front actuator tab (Fig. 34).

Figure 34

1. Actuator arm

2. Hitch pin

3. Rear hole in arm

3. Push sweeper to the left (Fig. 35) until the hitch pin can

be inserted into the rear hole in the actuator arm

(Fig. 34).

Figure 35

4. Install hitch pin securing the actuator arm to the front

actuator tab (Fig. 34).

5. Move sweeper back to transport position upon

completion of sweeping.

Using the Hopper Safety

Support

Whenever any work has to be done under the raised hopper,

the Hopper Safety Support must be installed onto the

extended lift cylinder.

1. Raise the hopper until the lift cylinder is extended.

2. Remove the hair pin cotter and pin securing the safety

support to the storage bracket on the sweeper frame

(Fig. 36). Remove the safety support.

Figure 36

1. Hopper safety support

2. Storage bracket

3. Pin

3. Insert the hopper safety support onto the cylinder rod,

making sure the support end rests against the cylinder

barrel and the cylinder rod end (Fig. 37). Secure the

hopper safety support to the cylinder rod with the hair

pin cotter and pin.