Operator's Manual

25
2. Engage the lift switch to raise and dump the hopper.
Important Make sure the sweeper is secured to the tow
vehicle hitch with the hitch pin and the clevis pin during
dumping operation.
Figure 38
3. Engage the lift switch to lower and close the hopper.
DUMPING HOPPER CAN CAUSE INJURY TO
BYSTANDERS OR PETS.
• Keep bystanders and pets a safe distance from
hopper when dumping hopper.
Caution
Inspection And Cleanup After
Operation
• When sweeping has been completed, thoroughly clean
and wash the machine. Air dry hopper. After cleaning, it
is recommended that the machine be inspected for
possible damage to mechanical components. These
procedures will assure that the machine will perform
satisfactorily during next sweeping operation.
Transporting Sweeper
• Never transport the sweeper when the transport alarm
and the light are activated.
• When transporting the sweeper, use the tie–downs to
secure the front of the machine (Fig. 39) and the axle
(Fig. 40) to secure the rear of the machine to the trailer.
Use of anything other than the proper tie–down
locations could cause damage to the machine.
1
1
Figure 39
1. Front tie–downs
1
1
Figure 40
1. Rear tie–down locations
Cold Weather Operation
• The Workman high flow hydraulics oil must reach a
operating temperature of 180_ for proper operation of
the floating sweeper head.