Service Manual

Pro Sweep 5200Hydraulic System Page 3 – 20
Hydraulic Control Manifold Service
1. Check valve
2. Demand solenoid (S2 port)
3. Solenoid coil
4. Nut
5. Solenoid valve (S1, S3 and S4 ports)
6. Hydraulic lift control manifold
Figure 14
1
6
2
3
4
5
5
5
3
3
4
4
20 to 25 ft–lb
(27 to 34 N–m)
22 ft–lb
(30 N–m)
36 in–lb
(4.1 N–m)
22 ft–lb
(30 N–m)
22 ft–lb
(30 N–m)
22 ft–lb
(30 N–m)
36 in–lb
(4.1 N–m)
36 in–lb
(4.1 N–m)
NOTE: The ports on the manifold are marked for easy
identification of components. Example: P is the pump
connection port (See Hydraulic Schematics to identify
the function of the hydraulic lines and cartridge valves
at each port).