Operator's Manual

3
InstallingtheHitchTongue
Partsneededforthisprocedure:
1HitchT ongue
1HitchPin
1
Bolt,3/8x1-1/4inch
1
Nut,3/8-16
1Largewasher
1Largenut
1
Squareheadsetscrew
Procedure
1.Inserttherearendofthehitchtonguebetweenthe
mountingplatesonthesweeperwhilealigningthe
mountingholes(Figure3).
Note:Thehoseguidesaretobepositionedontop
ofhitchtongue.
2.Insertthehitchpinthroughthemountingplatesand
thehitchtongue(Figure3).
3.Securethetopofthehitchpintothemountingplate
witha3/8x1-1/4inchboltanda3/8inchlocknut
(Figure3).
4.Securethebottomofthehitchpinwithalarge
washer,largenutandsquareheadsetscrew
(Figure3).
Figure3
1.Hitchtongue
4.LargeNut&squareheadsetscrew
2.Hitchpin5.Largewasher
3.Bolt,3/8x1–1/4inch&locknut,3/8inch
11