Operator's Manual

8
ConnectingtheHydraulic
Hoses
NoPartsRequired
Procedure
Connectthehydraulichosesfromthesweepertothe
quickcouplersonthetowvehicle(Figure13).
Figure13
1.Hydraulichoses2.Harness’
Important:Makesurethebrushrotatesinthe
properdirection(whenviewedfromthemotorend,
thebrushshouldrotateclockwise.Ifthebrushis
rotatingcounter-clockwise,reversehydraulichose
connections.
Note:Markthehighpressurehosewithacabletieor
somethingsimilartoidentifythecorrecthoseinstallation
(Fig.26).
Figure14
1.Highpressurehose
2.Cabletie
9
ConnectingtheHarness’
NoPartsRequired
Procedure
Connecttheharnessfromthesweepertothepower
harnessonthetowvehicle(Figure13).
10
MountingtheWindrowBlades
Partsneededforthisprocedure:
1Blademountingassembly
2
Bolt,7/16x3–1/4inch
4
Smallwasher
1Largewasher
1
Spacer
2Locknut
1
Chain
1
Bolt,3/8x1–1/4inch
1Flangenut
1
Snaplink
Procedure
1.Securetheblademountingassemblytotheleftend
ofthesweeperframewitha7/16x3-1/4inchbolt,
(2)smallwashers,alargewasherandalocknut.
PositioncomponentsasshowninFigure15.
2.Securethewindrowbladetothemountingassembly
witha7/16x3-1/4inchbolt,(2)atwashers,a
spacerandalocknut.Assemblythecomponentsas
showninFigure15.Thelongerendofthebladeis
tobepositionedawayfromthesweeper.
3.Securethechaintotheblademountingassembly
witha3/8x1-1/4inchboltandnut(Figure15).
4.Securetheotherendofthechaintotheslotinthe
framewiththesnaplink(Figure15).Thereshould
besomeslackinthechainwhenconnected.
5.Greasethettingontheblademountingassembly
andonthewindrowbladehubwithNo.2Lithium
Basedgrease.
15