Operator's Manual

Figure18
1.Locknut4.Rollerheightadjustingplat
2.Heightadjustingkey5.Rollerscraperadjusting
nuts
3.Rollerheightadjusting
nuts
4.Loosentherollerheightadjustmentlocknuts
(Figure18).
5.Pullouttheheightadjustorkeyandmovethe
rearrollerupordownbyslidingtherollerheight
adjustingplatetothedesiredheight(Figure18).
6.Tightenthelocknutssecuringtheadjustment.
7.Repeattheprocedureontheoppositeendofthe
brush.Makesuretheadjustmentsarethesame.
AdjustingtheRollerScraper
Therollerscraper(Figure18)shouldbeadjustedso
thereis1/16"clearancebetweenthescraperandthe
roller.Loosentherollerscraperadjustingnuts,position
rollerasdesiredandtightennuts.
AdjustingtheFrontFlap
Height
Forbestdebrispickupresults,thefrontap(Figure19)
shouldbeadjustedsothereis1/4"to1/2"clearance
betweenthebottomoftheapandsurface.Raisingthe
frontapallthewayorremovingthefrontapmaybe
requiredwhenpickinguplargerdebrisorifdebrisisto
bepickedupinlonggrass.
Figure19
1.Frontap
1.Loosenthenutssecuringthemetalstrapandthe
frontaptothebrushhousing(Figure20).
Figure20
1.Frontap
2.Metalstrap
2.Adjustthefrontaptothedesiredoperatingheight
andtightenthenuts.
CheckingtheTirePressure
Checktirepressuredailytoassureproperlevel.
Correcttirepressureis12-1/2psi.(Maximum18psi).
Note:Thevalvestemislocatedonthebacksideof
therim.
CheckingtheWheelLugNut
Torque
Failuretomaintainpropertorquecouldresult
infailureorlossofwheelandcouldresultin
personalinjury.Torquewheellugnutsto45-55
ft.lb.
19