Operator's Manual

5.Loosenthejamnutssecuringtheproximity
switchtotheframeandlowertheswitchuntil
itis2.6to4.0mm(0.10to0.16inch)fromthe
sensingplateonthehitchtongue(Figure4).
Tightenthejamnutstosecuretheadjustment.
g011587
Figure4
1.Proximityswitch
4.Sensingplate
2.Jamnut5.Hitchtongue
3.2.6to4.0mm(0.10to0.16
inch)
4
InstallingtheHydraulic
Cylinder
Partsneededforthisprocedure:
1Rearactuatortab
4
Bolt(1/2x2inch)
8
Flatwasher(0.531x0.063inch)
4
Locknut(1/2inch)
2
Bolt(3/8x1-1/4inch)
2Pinassembly
2
Flangenut(3/8inch)
Procedure
1.Mounttherearactuatortabtothemachine
framewith4bolts(1/2x2inch),8atwashers
(0.531x0.063),and4locknuts(1/2inch).
PositionthecomponentsasshowninFigure5.
g011261
Figure5
1.Rearactuatortab
2.Machineframe
2.Secureeachendofthehydrauliccylindertoan
actuatortabwithapinassembly,abolt(3/8x
1-1/4inch),andaangenut(3/8inch)Figure6).
Note:Makesurethattherodend(workingend)
ofthecylinderisattachedtothefrontactuator
tab.
g011260
Figure6
1.Frontactuatortab3.Hydrauliccylinder
2.Rearactuatortab4.Pinassembly
11