Operator's Manual

5
InstallingthePowerWire
Harness
Partsneededforthisprocedure:
1Powerwireharness
2
Cabletie
1Fuse
Procedure
1.Disconnectthebatteryfromthevehicle.
2.Attachthepowerwireharnessringterminalto
thegroundboltnearthevehiclefuseblock.
3.Plugtheharnesswireintotheredwireonthe
backofthefuseblock.
Note:IftheWorkmanvehicledoesnothave
anopenfuseslot,obtainandinstallaToro
accessoryfuseblock(PartNo.92-2641).
4.Insertthe20Afuseintotheslotinthefuseblock
(Figure7).
g248241
Figure7
1.Fuse2.Fuseblock
5.Routethewireharnessalongsidethemain
vehiclewireharnesstotherearofthevehicle
(Figure8).
g010992
Figure8
1.Powerwireharness
6.Securethewireharnesstothevehicleinseveral
placeswithcableties.Keeptheharnessaway
fromanyhotorrotatingcomponents.
Note:Theharnessisequippedwithaconnector
fortheoptionalbrakecontrolkit.
7.Connectthevehiclebattery;refertothevehicle
Operator’sManual.
12