Operator's Manual

11
AssemblingtheHandheld
Remote
Partsneededforthisprocedure:
1Handheldremote
4
Battery(AAA)
6
Smallscrews
Procedure
1.Removetherubberbandssecuringtheremote
halvestogether,andremovethebackcover.
2.Plugeachbatteryintoaterminalcradle,
observingproperpolarity(Figure17).
Note:Ifyouinstallthebatteriesimproperly,the
machinewillnotbedamaged,butitwillfailto
operate.Thecradleisembossedwithpolarity
markingsforeachterminal.
g029817
Figure17
1.Screw4.Steelgasket
2.Cover
5.Batteries
3.Seal
6.Handheldremote
3.Ensurethatthesteelgasketandrubbersealare
seatedinthechannelintheremoteandsetthe
backcoverinplace(Figure17).
4.Securethecoverwith6screws(Figure17)and
torquethemto1.5to1.7N∙m(13to15in-lb).
Note:Donotovertightenthescrews.
17