Operator's Manual

g011012

Figure20

1.Opennotches4.6to13mm(1/4to1/2inch)

2.Brushlength5.Brushdirection

3.Centerbrushshaftheight

1.Movethemachinetoalevelsurface.

2.Raisethehopperandinstallthehoppersafetysupport.RefertoUsingtheHopperSafetySupport

(page24).

3.Loosenthelocknutontheheightadjustmentkey(Figure21)sothatyoucanpullitoutapproximately

13mm(1/2inch).

g011013

Figure21

1.Locknut4.Roller-heightadjustingplate

2.Height-adjustingkeytab5.Roller-scraperadjustingnuts

3.Roller-heightadjustingnuts

4.Loosentheroller-heightadjustmentlocknuts(Figure21).

5.Pullouttheheight-adjustingkeyandmovetherearrollerupordownbyslidingtheroller-heightadjusting

platetothedesiredheight(Figure21).

6.Tightenthelocknutstosecuretheadjustment.

7.Repeattheprocedureontheoppositeendofthebrush;ensurethattheadjustmentsarethesame.