Operator's Manual

5
Specifications
General Specifications
General Description
The Finger Deck is used with the Toro Versa Vac. The primary function is to
facilitate debris removal from large turf areas.
Main Frame One piece–welded frame of 10 and 12 gauge formed steel.
Support
Four casters with adjustable height
Six 1/2 inch spacers per caster (3 inch of adjustment by 1/2 inch intervals).
Four pneumatic 4.1 – 4 NHS 2–ply tires.
Finger Rotor
One piece welded base weldment.
1 inch diameter shaft inside of a 2 in square tube with 3/16 wall.
88 rubber fingers 6 in long.
Operates @ 1100 rpm ± 100 rpm.
Motor Hydraulic gear motor .9 CID, with over hung load package.
Drive
Belt drive from motor to rotor shaft (3–3vx).
Drive ratio: 1.3 : 1
Love Joy torsion type belt tensioner with stabilizer bracket.
Deck Width 78 inch ± 2 inch over all (72 inch operating width)
Deck Height 20 inch ± 4 inch
Weight 283 lb. ± 25 lb.
Note: Specifications and design subject to change without notice.