Operator's Manual

g002136
Figure61
1.Brake-uidreservoir
2.Minimumline
4.Iftheuidlevelislow,performthefollowing:
A.Cleantheareaaroundthereservoircap
andremovethecap(Figure60).
B.AddDOT3brakeuidtothereservoiruntil
theuidlevelisabovetheMinimumline
(Figure61).
Note:Donotoverllthereservoirwith
brakeuid.
C.Installthereservoircap(Figure60).
5.Closethehoodofthemachine.
InspectingtheBrakes
ServiceInterval:Every100hours
Brakesareacriticalsafetycomponentofthemachine.
Aswithallsafetycomponents,theyshouldbeclosely
inspectedatregularintervalstoensureoptimum
performanceandsafety.
•Inspectthebrakeshoesforwearordamage.Ifthe
lining(brakepad)thicknessislessthan1.6mm
(1/16inch),thebrakeshoesshouldbereplaced.
•Inspectthebackingplateandothercomponents
forsignsofexcessivewearordeformation.Ifany
deformationisfound,theappropriatecomponents
mustbereplaced.
•Checkthebrake-uidlevel;refertoCheckingthe
Brake-FluidLevel(page50).
ChangingtheBrakeFluid
ServiceInterval:Every1,000hours
RefertoyourauthorizedAuthorizedServiceDealer.
BeltMaintenance
ServicingtheDriveBelt
CheckingtheDriveBelt
ServiceInterval:Aftertherst8hours
Every200hours
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,rotatethekeyswitchtotheOFF
position,andremovethekey.
2.Raisethecargoboxandsecureitwiththe
proprod;refertoRaisingtheCargoBoxtothe
ServicePosition(page20).
3.ShiftthetransmissionintoNEUTRAL.
4.Rotateandinspectthebelt(Figure62)forsigns
ofexcessivewearordamage.
Note:Replacethebeltifitisexcessivelyworn
ordamaged;refertoReplacingtheDriveBelt
(page52).
g034106
Figure62
1.Generator-pivotnut
5.Drivebelt
2.Generator-pivotbracket
6.Primaryclutch
3.Startergenerator7.Starter-generatorbelt
4.Secondaryclutch
5.Lowerthecargobox.
51