Operator's Manual

g192345
Figure35
1.Cotterpin
3.Dustcap
2.Nutretainer
9.Installthecotterpinandbendeachlegsaround
theretainer(Figure35).
10.Installthedustcapontothehub(Figure35).
11.Repeatsteps1through10forthehubandrotor
attheothersideofthemachine.
InstallingtheBrakesandWheels
1.Cleanthe2ange-headbolts(3/8x3/4inch)
andapplyacoatofanti-seizecompoundtothe
threadsofthebolts.
2.Alignthebrakepadstoeithersideoftherotor
(Figure30)andtheholesinthecaliperbracket
withtheholesinthebrakemountofthespindle
frame(Figure34).
3.Assemblethecaliperbrackettothespindle
frame(Figure30)withthe2ange-headbolts
(3/8x3/4inch),andtorquetheboltsto47to54
N∙m(35to40ft-lb).
4.Aligntheholesinthewheeltothestudsofthe
hubandassemblethewheeltothehubwiththe
valvestemoutward(Figure29).
Note:Ensurethatthemountingsurfaceofthe
wheelisushwiththehub.
5.Securethewheeltothehubwiththelugnuts
(Figure29),andtorquethenutsto108to122
N∙m(80to90ft-lb).
6.Repeatsteps1through5forthebrakeand
wheelattheothersideofthemachine.
ElectricalSystem
Maintenance
MaintainingtheBatteries
Removetheseatassemblyandraisethecargobox
beforemaintainingthebatteries;refertoRemoving
theSeatAssembly(page31)andRaisingtheCargo
BoxtotheServicePosition(page20).
WARNING
Batteryterminalsormetaltoolscouldshort
againstmetalcomponentscausingsparks.
Sparkscancausethebatterygasesto
explode,resultinginpersonalinjury.
•Whenremovingorinstallingthebattery,
donotallowthebatteryterminalstotouch
anymetalpartsofthemachine.
•Donotallowmetaltoolstoshortbetween
thebatteryterminalsandmetalpartsofthe
machine.
•Usenon-conductivetoolswhen
maintainingthebatteries.
•Alwayskeepthebatteryretainersinplace
toprotectandsecurethebatteries.
DANGER
Donottouchanyelectricalcomponentsor
contactsonthemotor.
Touchinganyofthesecomponentsor
contactscouldseriouslyinjureyouorcause
death.
35