Service Manual

Workman GTX Electric Lithium
Page 3B -- 48
Electrical System
Service and R epairs
Battery Service
1. Nut (4 used)
2. Rear bracket
3. Flange nut (2 used)
4. Flange nut (2 used)
5. Nut (2 used per battery)
6. Spring washer (2 used per battery)
7. Washer (2 used per battery)
8. Positive battery cable
9. Negative battery cable
10. Battery pack (4 used)
11. Carriage bolt (2 used)
12. Screw (2 used)
13. Flange nut
14. Front bracket
15. Screw
16. Isolator clamp
17. Isolator retainer
18. Battery data cable
19. Carriage bolt (4 used)
Figure 53
45 to 55 in--lb
1
(5 to 6.2 N--m)
(10 to 12.4 N--m)
90 to 110 in--lb
90 to 110 in--lb
(10to12.4N--m)
27 to 33 ft--lb
(36.5 to 44.5 N--m)
(36.5 to 44.5 N--m)
27 to 33 ft--lb
72 to 88 in--lb
(8 to 10 N--m)
72 to 88 in--lb
(8 to 10 N--m)
7
6
5
15
16
17
18
2
3
4
5
6
7
8
9
10
11
12
19
14
13
The GTX Electric Lithium machine is powered by four
maintenance free lithium--ion batteries. Each battery
consists of numerous cells. The batteries are connected
in parallel and manged by SC1: Lithium--ion battery con-
troller (also known as Battery Management System or
BMS).
IMPORTANT: Do not open the lithium--Ion batteries.
There are no serviceable parts on or in the battery
pack. If you open the battery, you will void the war-
ranty. The battery is protected by tamper--alerting
devices.