Service Manual

Workman GTX ElectricPage 5 -- 22Chassis

Rear Brake Caliper Service

1. Brake caliper assembly (LH shown)

2. Caliper slide pin (2 used)

3. Anti--rattle spring (2 used)

4. Brake pad assembly

5. Bleed screw

Figure 18

30 to 35 ft--lb

(41to47N--m)

108 to 132 in--lb

(12.3 to 14.9 N--m)

NOTE: Replacement parts for the rear caliper assem-

bly are limited to the brake pad assembly and bleed

screw. If any other caliper components are damaged or

worn, replace the caliper assembly.