Operator's Manual

AdjustingtheHeadlights
Usethefollowingproceduretoadjusttheheadlight
beampositionwheneveraheadlightassemblyis
replacedorremoved.
1.TurnthekeyswitchtotheONposition,andturn
ontheheadlights.
2.Atthebackoftheheadlightassembly,rotate
adjustmentscrews(Figure42)topivotthe
headlightassemblyandalignthepositionofthe
castbeam.
3.Connectthebatteryandclosethehood;referto
ConnectingtheBatteries(page39).
DriveSystem
Maintenance
MaintainingtheTires
ServiceInterval:Every100hours—Checkthe
conditionofthetiresandrims.
Every100hours—Torquethewheel-lugnuts.
1.Inspectthetiresanrimsforsignsofwearand
damage.
Note:Operatingaccidents,suchashitting
curbs,candamageatireorrimandalsodisrupt
wheelalignment,soinspecttireconditionafter
anaccident.
2.T orquethewheel-lugnutsto108to122N∙m(80
to90ft-lb).
42