Operator's Manual

g192345
Figure35
1.Cotterpin
3.Dustcap
2.Nutretainer
9.Installthecotterpinandbendeachlegsaround
theretainer(Figure35).
10.Installthedustcapontothehub(Figure35).
11.Repeatsteps1through10forthehubandrotor
attheothersideofthemachine.
InstallingtheBrakesandWheels
1.Cleanthe2ange-headbolts(3/8x3/4inch)and
applyacoatofmedium-strengththread-locking
compoundtothethreadsofthebolts.
2.Alignthebrakepadstoeithersideoftherotor
(Figure30)andtheholesinthecaliperbracket
withtheholesinthebrakemountofthespindle
frame(Figure34).
3.Securethecaliperbrackettothespindleframe
(Figure30)usingthe2ange-headbolts(3/8
x3/4inch).
Torquethe2ange-headboltsto47to54N∙m
(35to40ft-lb).
4.Aligntheholesinthewheeltothestudsofthe
hubandassemblethewheeltothehubwiththe
valvestemoutward(Figure29).
Note:Ensurethatthemountingsurfaceofthe
wheelisushwiththehub.
5.Securethewheeltothehubusingthelugnuts
(Figure29).
Torquethelugnutsto108to122N∙m(80to90
ft-lb).
6.Repeatsteps1through5forthebrakeand
wheelontheothersideofthemachine.
ElectricalSystem
Maintenance
MaintainingtheBatteries
Removetheseatassemblyandraisethecargobox
beforemaintainingthebatteries;refertoRemoving
theSeatAssembly(page31)andRaisingtheCargo
BoxtotheServicePosition(page20).
WARNING
Batteryterminalsormetaltoolscouldshort
againstmetalcomponentscausingsparks.
Sparkscancausethebatterygasesto
explode,resultinginpersonalinjury.
•Whenremovingorinstallingthebattery,
donotallowthebatteryterminalstotouch
anymetalpartsofthemachine.
•Donotallowmetaltoolstoshortbetween
thebatteryterminalsandmetalpartsofthe
machine.
•Usenon-conductivetoolswhen
maintainingthebatteries.
•Alwayskeepthebatteryretainersinplace
toprotectandsecurethebatteries.
DANGER
Donottouchanyelectricalcomponentsor
contactsonthemotor.
Touchinganyofthesecomponentsor
contactscouldseriouslyinjureyouorcause
death.
35