Operator's Manual

1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface,settheparkingbrake,shutofftheengine,andremovethekey.
2.Raisethebeduntilthebedproprodisfullyengaged;refertotheOperator’sManualforthemachine.
3.Removetheseatbase.
4.Disconnectthenegativebatterycable;refertoyourOperator’sManual.
2
RemovingtheStrutAssembly
ForMachineswithSerialNo.403448001andBeforeOnly
NoPartsRequired
Procedure
Note:Ifyourmachineunithasthesilverspringsinstalled,skipthisstep.
1.Removethefrontwheel.
2.Removethehex-headbolt(3/8x4-3/4inches)andangenut(3/8inch)fromthespindle(Figure1).
3.Removethehex-headbolt(3/8x3-1/2inches)andangenut(3/8inch)fromthecontrolarm(Figure1).
4.Removethehex-headbolt(1/2x2-1/4inches)andlocknut(1/2inch)securingthestrutassemblyto
theupperframe(Figure1).
5.Removethestrutassembly(Figure1).
Note:Repeatthisprocedurefortheothersideofthemachine.
4