Installation Instructions

FormNo.3402-355RevA

FrontHitchKit

Workman

GTXSeriesUtilityVehicleswithBrushGuard

ModelNo.07146

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Frontquickattachment1

Carriagebolt(5/16x1inch)

Carriagebolt(5/16x7/8inch)

Flangenut(5/16inch)

Hex-socket,button-headbolt1

Jamnut1

T-handle1

Installthekit.

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

1.Stopthemachineonalevelsurface,settheparking

brake,shutofftheengine,andremovethekey.

2.Removeanddiscardthe2existingcarriageboltsand2

locknutsfromthebrushguardasshowninFigure1.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3402-355*A

PAGE 1
Form No. 3402-355 Rev A Front Hitch Kit Workman® GTX Series Utility Vehicles with Brush Guard Model No. 07146 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped.
PAGE 2
Figure 1 1. Front quick attachment 4. Flange nut (5/16 inch) 7. T-handle 2. Carriage bolt (5/16 x 1 inch) 5. Hex-socket, button-head bolt 8. Brush guard 3. Carriage bolt (5/16 x 7/8 inch) 6. Jam nut 9. Bumper 3. Loosely install the front quick attachment with 2 carriage bolts (5/16 x 1 inch) and 2 flange nuts (5/16 inch) as shown in Figure 1. 4. Loosely install the front quick attachment with 4 carriage bolts (5/16 x 7/8 inch) and 4 flange nuts (5/16 inch) as shown in Figure 1. 5.