Service Manual

Distributor Installation
1. Remove timing belt cover A.
cover A
Tiiming belt
Figure 133
2. Turn crankshaft clockwise and align mating marks on
camshaft sprocket and rear timing belt cover to bring
belt cover
No. 1 cylinder to top dead center on compression stroke.
Mating
mark
Camshaft
sprocket
Rotation
Rear timing
Figure 134
3. Align mating marks on distributor housing and cou-
pling.
Figure 135
4. Install distributor to engine while aligning stud with
elongated hole on distributor flange.
Figure 136
Liquid Cooled
Gas Engine
Workman 3000/4000 Series
Page 3 – 71
Liquid Cooled Gas Engine