Service Manual

Crankshaft
1. Perform steps 1 - 5 under Piston and Connecting Rod
in this section.
2. Remove the flywheel.
3. Remove the rear oil seal case.
4. Remove the main bearing caps (Fig. 91). Keep each
set
of bearings together with its bearing cap.
5. Remove the crankshaft.
6. Inspect the removed parts. Repair or replace any
worn or damaged parts (Fig. 92).
F
igure 91
Figure 92
Liquid Cooled Diesel Engine Page 4 - 76
Workman 3300-D/4300-D