Service Manual

Specifications
General Specifications
Item Specification
Clutch pedal free play 19 mm (.75 in.) min.
Transaxle countershaft end play 0.00 – 0.10 mm (.000
– .0039 in.)
Transaxle ring gear backlash 0.08 – 0.18 mm (.0031
– .0071 in.)
with max. variation of 0.05 mm (.0019 in.)
at three different points checked
Liquid gasket (transaxle case gasket) Three–Bond 1216 or Loctite 599
Transaxle oil Dexron III ATF
Oil capacity (Fig. 2) 7.5 qt. U.S. (7.1 liter) system capacity
1
Figure 2
1. Dipstick
Torque Specifications
Item Specification
Clutch cover bolt 7.0 – 9.0 Nm (5
– 7 ft–lb)
Drive shaft yoke to stub axle flange nut 300 – 340 Nm (220
– 250 ft–lb)
Drive shaft clamp bolt 47 – 57 Nm (35
– 42 ft–lb)
Transaxle differential case to ring gear capscrews 24.5 – 29.5 Nm (18.5
– 22 ft–lb)
Transaxle shift arm locknuts 24.5 – 29.5 Nm (18.5
– 22 ft–lb)
Transaxle case capscrews 24.5 – 29.5 Nm (18.5
– 22 ft–lb)
Transaxle PTO cover capscrews 15 – 17 Nm (1
1 – 13 ft–lb)
Drive Train
Workman 3000/4000 Series Page 6 – 3
Rev. D
Drive Train