Service Manual

34. Install differential lock arm (Item 1) onto fork shaft.
Insert lock pin into fork shaft and arm. Pay attention to
direction of slit in lock pin.
1
Figure 128
35. Apply silicone sealant to mating surface of upper
cover (Item 2). Pay attention to direction of cover and
install.
Tighten capscrews (Item 1) to a torque of 24.5 –
29.5 Nm (18.5 –
22 ft–lb).
1
2
Figure 129
Workman 3000/4000 Series Page 6
– 53 Drive Train
Drive Train