Service Manual

Parking Brake Adjustment
1. Loosen set screw securing knob to parking brake le-
ver.
2. Rotate knob until a force of 55 to 65 lbs. (25 to 29 kg)
is required to actuate lever
.
3. Tighten set screw after making adjustment.
1
3
2
Figure 4
1. Parking brake lever
2. Knob
3. Set screw
Front Wheel Toe–In
1. Measure center to center distance (at axle height) at
front and rear of steering tires. Front measurement must
be equal to the rear measurement + 1/8 in. (3 mm).
2. To adjust, loosen jam nuts at both ends of tie rod.
3. Rotate tie rod to move front of tires
inward or outward.
4. Tighten tie rod jam nuts after making adjustment.
Distance
Center–to–center
Figure 5
1
Figure 6
1. Tie rod
Workman 3000 Series Page 7 – 5
Rev. D
Steering, Brakes and Supension
Steering, Brakes
& Suspension