Service Manual

Special Tools
Pressure Test Pressure Gauge Kit
Use this kit to take various pressure readings for diag-
nostic tests of the liquid propane (LP) gas fuel system.
The kit contains one each of the following: 0 to 160 PSI
test gauge, 0 to 5 PSI test gauge, and 0 to 10 inches
(H
2
O) vacuum gauge, vacuum hose, and assorted fit-
tings. Use gauges as recommended in Testing section
of this chapter. These gauges and fittings can be ob-
tained locally or through a local IMPCO Technologies
distributor. When acquiring this equipment through local
suppliers, make sure to check test port fitting sizes as il-
lustrated in the Testing section of this chapter.
Figure 2
Liquid Propane Gas
Conversion Kit
Workman 3000/4000 Series
Page 11 – 5
Rev. D
Liquid Propane Gas Conversion Kit