Service Manual

Rev. D
Liquid Propane Gas
Conversion Kit
Workman 3000/4000 Series
Page 11 – 13 Liquid Propane Gas Conversion Kit
Conversion Kit Assembly
1. Hose clamp
2. Hose adapter
3. 2–inch rubber elbow
4. Cap screws
5. Lock washer
6. Vapor hose
7. Vaporizer–regulator
8. Elbow
9. Fitting
10. Vacuum hose
11. 1/4–inch NPT nipple fitting
12. 3/8–inch flare to 1/4–inch fitting
13. HOse assembly
14. Support strap
15. 1/2–inch heater hose
16. 1/2–inch heater hose
17. 1/4–inch NPT
18. Worm clamp
19. Convoluted split tubing
20. Cable tie
21. 1/2–inch hose mender
22. Hose bard fitting
23. R–clamp
24. Hose clamp
25. Expander adapter
26. Worm clamp
27. 1/4–inch vacuum clamp
28. 3/16–inch vacuum cap
29. Not used
30. 1/8–inch NPT to 1/4–inch fitting
31. Vacuum fuelock–Filter
32. Converter bracket
33. 5/8–inch by 3/8–inch NPT fitting
34. 45_ fitting
35. Starting valve
36. Wire harness
37. PVC hose
38. Vacuum connector
39. Filter screen
40. Engine decal
41. Air intake hose
Figure 10
1
2
3
4
5
6
789
10
16
17
18
19
20
21
23
24
26
27
26
10
30
11
12
13
14
15
1
1
6
4
5
15
16
18
18
28
31
32
33
24
18
38
10
34
35
36
37
18
22
25
40
39
31
41
Removal
1. Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2. Read carefully Precautions for Working on Liquid
Propane Gas Systems before proceeding further.
3. Remove component parts as necessary using Fig-
ure 10 as a guide.
Installation
1. Read carefully Precautions for Working on Liquid
Propane Gas Systems before proceeding further.
2. Install component parts as necessary using Figure
10 as a guide.