MODEL NO. 07224-80001 & UP MODEL NO. 07223-80001 & UP FORM NO. 99-0489 OPERATOR'S AND PARTS CATALOG I L INDUSTRIAL WORKMAN KIT f To assure maximum safety, optimum performance, and to ?ain knowledge of the product, it is essential that you or any other operator of this Vehicle read and understand the contents of this manual before the engine is ever started. Pay particular attention to the SAFETY INSTRUCTIONS highlighted by the triangular safety alert symbol.
A\ SAFETY INSTRUCTIONS A\ WARNING e Do not exceed capacity. Maximum capacity of operators, attachments and cargo is 1800 LB (4000 LB. GVW) or Bod Kg (1800Kg GVW). ® Always distribute cargo load evenly on bed with center of gravity of load forward af rear axle. WHILE OPERATING: 3. Always Follow workman vehicle operating instructions in Workman Vehicle Operator's Manual, 4. DO NOT OVERLOAD THE VEHICLE, Never exceed maximum Operator and Pay Load Capacity of 1800 I and maximum Gross Vehicle Weight of 4000 lb.
A\ SAFETY INSTRUCTIONS 1. When service is complete, reinstall the care bed in its original position and secure with the pins at the rear and the bolts at the front. Refer to Torque Specs. 8. Keep ali news, bolts and other fasteners tightened securely. Replace any shields removed during servicing or adjustments. 9. To be sure of optimum performance and safety, always purchase genuine TOR replacement pairs and accessories. Replacement parts and accessories made by other manufacturers could be dangerous.
MAINTENANCE A\ WARNING IMPROPER USE OF THE CARGO BED MAY C&?& SERIOUS PERSONAL INJURY Never lift entire vehicle by the bed Lifting Lugs. ® Never pivot bed on rear pins., @ Remove all securing pins and bolts and remove bed for service. ® fi;vzays remove all cargo before removing o Fig 4: Diesel Engine & Always lift bed at all four corners. 1. Access door 2. Overfill cap ® Do not exceed capacity. Maximum . Lo . capacity of operators, attachments and B.
MAINTENANCE €. For all engine bay service requiring the removal of the cargo bed, adhere to the previous removal procedures in Maintenance Safety Instructions on Page 2. D. Refer to Workman Operator's Manual for service instructions. 2. Installation of welding gas bottles (for units equipped with optional Acetylene Tray Kit Model 07224). A. Remove cover plate from industrial bed. B. Remove fasteners securing the Bottle Restraint Plate at the front left corer of the cargo bed and set plate aside. €.
1381 Model Number 07224 # {Part No. Description Qty # 1 Part No. Description Qty] 1 199-0433 Flatbed Assembly 1 13 |92-2667 Bracket Attachment Mount 2 2 legalese Black Wear 4 14 3234-32 Screw Cap HH 1/2° Whizkid | 4 3 [3250-45 Screw Pan Hd.
8 el ¢ 1362 # i Part No. Description Qty # | Part No.
