Service Bulletin

Customer Service Bulletin

Commercial Business Group

Workman

1100/2100 Series

January 21, 2002

Model/Serial Range: Model Numbers: Serial Numbers:

07252 210000101 - 220099999

07252TC 210000101 - 220099999

07253 200000101 - 220099999

07253TC 200000101 - 220099999

Subject: Updated A-Arm Setting Criteria and Procedure.

Proper initial A-Arm positioning is required to prevent unlevel front suspension settings

and to assure Ride Height and Toe-in may be correctly adjusted. The attached setting

criteria and procedure explains proper starting settings of the A-Arms during

replacement.

NOTE: If the machine does not have the “poundage” number next to the serial tag on

the A-Arm, as described in the accompanying “A-Arm Setting Criteria Procedure”,

contact your Toro distributor Service facility for further instructions.

After A-Arm replacement, refer to “Updated Front Suspension Adjustment Procedure”

Service Bulletin, dated January 2, 2002 for Vehicles, for proper adjustment sequences

of the Ride Height and Toe-In.

This updated A-Arm Setting Criteria and Procedure replaces previously published

adjustment procedures described in all the Operators Manuals, Service Manuals and

Training Materials printed prior to this date.

Ref: 12-06 Copyright



, 2002. The Toro Company

PAGE 1
Customer Service Bulletin Commercial Business Group Workman® 1100/2100 Series Model/Serial Range: Model Numbers: 07252 07252TC 07253 07253TC Subject: January 21, 2002 Serial Numbers: 210000101 - 220099999 210000101 - 220099999 200000101 - 220099999 200000101 - 220099999 Updated A-Arm Setting Criteria and Procedure. Proper initial A-Arm positioning is required to prevent unlevel front suspension settings and to assure Ride Height and Toe-in may be correctly adjusted.
PAGE 2
January 22, 2002 A-Arm Setting Criteria and Procedure for Workman 1100/2100 Series 1. Look under each A-Arm for a serial tag and find numbers between 200 and 400 written next to the serial tag. These numbers reference the hole numbers into which the A-arm retaining bolts should be placed.