Installation Instructions

4
7. Remove the plug from the hole in the right side of the
dash (Fig. 6).
8. Remove the plug from the middle hole in the dash
(Fig. 6).
2
1
Figure 6
1. Plugged hole 2. Switch
9. Insert the switch into the hole in the dash (Fig. 6).
Loose or improperly secured battery connections
could damage the vehicle and cables causing
sparks. Sparks can cause the battery gasses to
explode, resulting in personal injury.
• Always ensure the battery polarity when
making connections.
Warning
10. Replace the short battery cable removed previously.
Torque the nuts securing all battery cables to 120 to 180
inch-lb (13.5 to 21 N⋅m).
11. Coat the battery terminals with Toro battery terminal
protector.