Installation Instructions

WARNING
Araisedboxcouldfallandinjurepersonsthat
areworkingbeneathit.
•Alwaysusetheproprodtoholdtheboxup
beforeworkingunderthebox.
•Removeanyloadmaterialfromthebox
beforeraisingit.
Figure1
1.Proprod
4.Removeashortbatterycablelinkinganytwo
batteriesinthebatterybanktoremovepowerfrom
thesystem(Figure2).
Figure2
1.Shortbatterycable
5.Removethe2angeheadscrewssecuringeachside
ofthelatchrodbrackettotheundersideandfront
faceofthebox(
Figure3).Retainallpartsforfuture
use.
Figure3
1.Latchrodbracket3.Flangeheadscrew,inside
frontfaceofbox
2.Latchrod4.Flangeheadscrew,
undersideofbox
2
InstallingtheBedLift
Partsneededforthisprocedure:
1
Liftbracket,upper
4
Flangeheadscrew(5/16x3/4inch)
1
Liftcylindersupport
1
Liftactuator
2U-bolts
6
Flangenut(3/8inch)
2
Carriagebolts(3/8x3/4inch)
1
Clevispin
1
Cotterpin
Procedure
1.Removethescrewsfromthebracesontheunderside
oftheboxinthepositionsshownin(Figure4).
2.Mounttheupperliftbrackettotheundersideofthe
boxwith6angeheadscrews(5/16x3/4inch)
fromloosepartsandremovedpreviously.Position
thebracketasshowninFigure4.
2