Service Manual

Workman MD/MDX Page 7 − 53 Chassis
Removal (Fig. 39)
1. Park machine on a level surface, stop engine, set
parking brake and remove key from the ignition switch.
2. Disassemble cargo box as necessary using Figures
39 and 40 as guides.
Installation (Fig. 39)
1. Assemble cargo box using Figures 39 and 40 as gui-
des.
A. When installing cargo box, use torque specifica-
tions identified in Figure 39.
B. Adjust latch pin (item 3 in Figure 39) so that cargo
box is tight to frame when latched.
1. Cargo box
2. Inner tailgate
3. Outer tailgate
4. RH latch rod
5. Latch handle
6. Screw (24 used)
7. LH latch rod
8. Retainer (2 used)
9. Striker mount (2 used)
10. Strike latch (2 used)
11. Screw (4 used)
12. Screw (4 used)
Figure 40
2
3
6
8
9
10
11
1
5
7
12
4
6
6
Chassis
Rev. A