Installation Instructions

FormNo.3437-363RevA

SecondaryRearReceiverKit

Workman

GTXUtilityVehiclewithCargoBed

ModelNo.07285

InstallationInstructions

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachineforinstallation.

Rearreceiverbracketassembly1

Flange-headbolt(5/16x3/4inch)

Nut1

Bolt(3/8x1-1/2inches)

Handle1

Installthekit.

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengineandremovethekey.

g038447

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3437-363*A

PAGE 1
Form No. 3437-363 Rev A Secondary Rear Receiver Kit Workman® GTX Utility Vehicle with Cargo Bed Model No. 07285 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Use Qty. 1 No parts required – Prepare the machine for installation.
PAGE 2
3. 2 Secure the rear receiver kit to the underside of the cargo bed using 8 flange-head bolts (5/16 x 3/4 inch) as shown inFigure 4. Installing the Kit Parts needed for this procedure: 1 Rear receiver bracket assembly 8 Flange-head bolt (5/16 x 3/4 inch) 1 Nut 1 Bolt (3/8 x 1-1/2 inches) 1 Handle Procedure 1. Locate the hole to install the handle (Figure 2). g191316 Figure 4 1. Flange-head bolt (5/16 x 3/4 inch) 4. g309628 Figure 2 2.