Installation Instructions

Printed in the USA

 2001 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Portable Refreshment Center

Workman



2100

Model No. 07298

Form No. 3327-153 Rev A

Installation Instructions

1. Position the machine on a level surface. Set the

parking brake, stop the engine, and remove the key.

If you leave the key in the ignition switch,

someone could accidently start the engine and

seriously injure you or other bystanders.

Remove the key from the ignition switch before

you do any maintenance.

Caution

2. Slide the refreshment center into the cargo box as

shown in Figure 1.

m–5700

Figure 1

1. Holding post

2. Screw

3. Washer

3. If you will be using the vehicle on rough terrain and

would like the covers on the container to fit tighter,

attach the holding posts to the container with the

screws and washers (Fig. 1)

PAGE 1
Form No. 3327-153 Rev A Portable Refreshment Center Workman 2100 Model No. 07298 Installation Instructions 1. Position the machine on a level surface. Set the parking brake, stop the engine, and remove the key. Caution If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders. Remove the key from the ignition switch before you do any maintenance. 2. Slide the refreshment center into the cargo box as shown in Figure 1.