Operator's Manual

AccessingtheHood
1.Releasetherubberstrapsonbothsidesofthehood
(Figure25).
Figure25
2.Raisethehood.
3.Lowerthehoodtocloseanduserubberretaining
strapstosecurethehood.
Lubrication
Lubricateallofthebearingsandbushingsevery100hours
oronceayear,whicheveroccursrst.Greasethemmore
frequentlywhenusingthemachineforheavy-dutyoperations.
GreaseType:Number2GeneralPurposeLithium-Base
Grease
AddingGrease
ServiceInterval:Every100hours
1.Wipethegreasettingcleansoforeignmattercannot
beforcedintothebearingorthebushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeoffanyexcessgrease.
Thegreasettingsarelocatedatthe4tie-rodends(Figure
26)andthe2kingpins(Figure27).
Figure26
Leftsideshown
1.Greasetting
2.Tierod
Figure27
26