Installation Instructions

Manual No. 3353-669 Rev D
Installation Instructions and Parts Manual
11-21-05
05-10435
30. Install (3) bubble rubber strips, 4.00” long onto the top center bracket as shown in Figure 5.
Securing the Roof
31. The red roof may be supplied with a protective plastic covering. Remove if present.
32. Secure roof to frame using (4) 5/16” x 1.50” long, (8) 5/16” flat washers, (4) 5/16” nylock nuts, (8)
soft rubber mount washers and (4) hard cap mount washers. See Figures 6 and 7.
33. Tighten roof bolts so rubber creates a water tight seal. Do not over tighten!
34. Tighten all remaining hardware at this time.
Related Option Kits:
110-2500 Front Fold-Down Windshield Kit includes a front ABS fold-down windshield and (6) window
retainers that secure windshield to front sunshade uprights.
Figure 6
Figure 7
(FRONT BRACKET UNDER SIDE)
(ROOF TOP SIDE)
HARD CAP
WA
S
HER
TOP SOFT
WASHER
Fi
g
ure 5
Step 30
Step 26
5/16 FLAT
WASHER
5/16 X 1.50 BOLT
5/16
NYLOCK
NUT
MID SOFT WASHER
TO BE PLACED
BETWEEN ROOF
UNDERSIDE AND
BRA
C
KET
S
5/16 FLAT
WASHER
Page 5 of 8