Service Manual

Workman HD Series Page 6 -- 5 Drive Train

Adjustments

PTO Cable Adjustment (If Equipped)

1. Remove clevis pinthatsecuresPTOcabletoPTOle-

ver arm.

2. Loosen clevisjam nut and adjust clevis so clevis hole

aligns with hole in PTO lever arm.

3. Tighten jam nut making sure that holes in clevis and

lever arm still align.

4. Secure PTOcableclevis to PTOleverarm with clevis

pin.

1. PTO lever arm

2. PTO cable

3. Clevis pin

4. Clevis jam nut

Figure 3

Drive Train